INSPECTION, TESTING AND EXAMINATION – ENGINEERING CONTROL
Industrial Ventilation means, where the natural ventilation is not adequate further means of natural or mechanical ventilation or both shall be provided. Our team has registered hygiene technicians in DOSH in conducting the Inspection, Testing and Examination of LEV and GEV. SEE Laboratory provides its expertise in LEV examination for following systems.
- EXHAUST VENTILATION SYSTEM
- SPRAY BOOTH
- DUST COLLECTOR
- SCRUBBER
- GENERAL VENTILATION SYSTEM
Air Cleanliness means, where any process given off any offensive fume or dust which is or likely to be offensive or injurious to any person or being accumulated, measures shall be taken to protect against inhalation and prevent accumulation.Application of Act is at all place of work in which hazardous chemical to health is used and place of work such as Production area, Processing, Storage, Handling, Transport, Disposal and Treatment. According to USECHH Reg. 2000. , Part V, under clause “Action to Control Exposure” stated a control measure by Application of Engineering Control Equipment USECHH Reg.2000. Section 17, Employer should inspect the LEV and GEV at interval not longer than one month once and the LEV and GEV system should examined and tested for its effectiveness by Industrial hygienist at the interval not longer than 12 months.
![](https://sees.com.my/wpadmin/wp-content/uploads/2021/11/INSPECTION_TESTING_EXAMINATION_ENGINEERING_CONTROL.jpg)
![](https://sees.com.my/wpadmin/wp-content/uploads/2021/03/industrial-ventilation-equipment-for-lab.jpg)